2013 Infiniti JX35
Mileage
110,591
Service Date
4/24/2025
Services Performed
- AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
- AAA MEMBER INSPECT THE FRONT END. THE DEALER RECOMMENDED REPAIRS AND HE WOULD LIKE A SECOND OPINION. INSPECT THE BALL JOINTS AND CONTROL ARMS.
- Roadtest, inspect the integrity of the steering and suspension components, inspect the front and rear tires, inspect for excessive "play" in the wheel bearings and other related components, and advise: WE FOUND THE OUTER RODS WORN AND THE LOWER CONTROL ARM BUSHINGS BROKEN. WE RECOMMEND TO REPLACE AT THIS TIME.
- STANDARD SYNTHETIC OIL CHANGE SERVICE: ____ SERVICE LIGHT RESET (This price applies to most cars, SUV's, trucks, and European cars cost extra) ____ LUBE STICKER Quote is for 5 quarts of Multi-grade synthetic motor oil per manufacturer specifications, additional quarts, grades, extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
- Environmental Waste Disposal Fee, EPA ID# CAL000295851
- California Recycling Fee
- FOUND: The rear brake pads & rotors will need to be replaced in the near future.
- Inspect the tire PSI and Inflate to Proper Specifications Front _33____PSI Rear__33___PSI
- TIE ROD &/OR END – Remove & Replace – Outer,Both – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some models. If
- CONTROL ARM – Remove & Replace – Lower,Both – [DOES NOT include alignment.]
- Inspect and make required adjustments to set "toe", "caster", and "camber" to factory specifications on the front and rear suspension (where applicable). Alignment warranty requires tire rotations and checking tire pressure in accordance with manufacturer's specifications.
- REMOVE & REPLACE- REAR WIPER BLADE
- Clean the battery terminals and cables and connections, reassemble, apply electrical coating if applicable.
JEFF & REBECCA B. gave our service a 5 star review on 4/24/2025
