2018 Toyota Camry
Mileage
120,604
Service Date
2/18/2026
Services Performed
- AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
- STANDARD SYNTHETIC OIL CHANGE SERVICE: ____ SERVICE LIGHT RESET (This price applies to most cars, SUV's, trucks, and European cars cost extra) ____ LUBE STICKER Quote is for 5 quarts of Multi-grade synthetic motor oil per manufacturer specifications, additional quarts, grades, extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
- California Recycling Fee
- Environmental Waste Disposal Fee, EPA ID# CAL000295851
- FOUND: WE FOUND THE FRONT & REAR BRAKES IN SPECIFICATIONS AT THIS TIME.
- –USE OF SCAN TOOL TO DETERMINE TEMPERATURE OF TRANSMISSION FOR PROPER DRAINING TEMPERATURE –USE OF SCAN TOOL TO CONFIRM OPENING OF TRANSMISSION THERMOSTAT AND CONFIRM FLOW –DRAIN THE AUTOMATIC TRANSMISSION FLUID IN THE TRANSMISSION PAN, NOTE: THERE IS STILL A MAJORITY OF TRANSMISSION FLUID IN THE TORQUE CONVERTER THAT IS NOT REPLACED WITH THIS SERVICE –REFILL TRANSMISSION PAN WITH NEW FLUID
- Extract the existing brake fluid, replenish the system with fresh fluid, bleed the system of any air or preexisting brake fluid.
- Environmental Waste Disposal Fee, EPA ID# CAL000295851
- Clean the throttle body and butterfly valve, clean the mass air flow sensor, induce a cleaner to service the intake valves, intake plenum, combustion chamber, piston tops, + add a concentrated cleaner to the fuel tank. Take advantage of these cleaning chemicals by filling your fuel tank right away!
- Pressure test the system, inspect the accessory drive belts and cooling system hoses, drain and refill the cooling system.
- SPARK PLUGS – Remove & Replace – 2.5L Eng
- SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include disassemble or alignment.]
- SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include wheel alignment. Includes: Initialization.] – [Includes: Bleed Brake System (where applicable). DOES NOT include disassemble or alignment (where applicable).]
- Inspect and make required adjustments to set "toe", "caster", and "camber" to factory specifications on the front and rear suspension (where applicable). Alignment warranty requires tire rotations and checking tire pressure in accordance with manufacturer's specifications.
- Inspect the tire PSI and Inflate to Proper Specifications Front __32___PSI Rear__32___PSI
SALLY S. gave our service a 5 star review on 2/19/2026
