2019 Nissan Maxima
Mileage
83,500
Service Date
12/5/2025
Services Performed
- AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
- STANDARD SYNTHETIC OIL CHANGE SERVICE: ____ SERVICE LIGHT RESET (This price applies to most cars, SUV's, trucks, and European cars cost extra) ____ LUBE STICKER Quote is for 5 quarts of Multi-grade synthetic motor oil per manufacturer specifications, additional quarts, grades, extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
- Environmental Waste Disposal Fee, EPA ID# CAL000295851
- California Recycling Fee
- FOUND: WE FOUND THE FRONT BRAKES IN SPECIFICATIONS, THE REAR BRAKES WILL NEED TO BE REPLACED SOON.
- PERFORM NECESSARY DIAGNOSTIC TESTING AND ADVISE:
- FOUND: I inspected the vehicle and verified the client's concern that the check engine light is illuminated and there is no significant drivability issue present. I retrieved diagnostic trouble code p0128, which indicates there's a cooling system performance fault. I test-drove the vehicle and found that the engine coolant temperature is cooler than anticipated. I performed necessary diagnostic testing and found that the thermostat is no longer able to properly regulate engine temperature. Replacement of the thermostat assembly will be required. Recommend replacing the thermostat assembly.
- THERMOSTAT – Remove & Replace
- Install premium grade brake pad set, clean and lubricate the caliper guides and hardware, inspect the hydraulic system reassemble and make adjustments as required. Remove brake rotors for resurfacing or replacement.
- Inspect the tire PSI and Inflate to Proper Specifications Front __32___PSI Rear__32___PSI
JIM W. gave our service a 5 star review on 12/6/2025
