2017 Honda Civic
Mileage
80,772
Service Date
5/28/2024
Services Performed
- AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
- STANDARD SYNTHETIC OIL CHANGE SERVICE: ____ SERVICE LIGHT RESET (This price applies to most cars, SUV's, trucks, and European cars cost extra) ____ LUBE STICKER Quote is for 5 quarts of Multi-grade synthetic motor oil per manufacturer specifications, additional quarts, grades, extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
- California Recycling Fee
- Environmental Waste Disposal Fee, EPA ID# CAL000295851
- FOUND:
- Inspect the tire PSI and Inflate to Proper Specifications Front __33___PSI Rear__33___PSI
- PERFORM NECESSARY DIAGNOSTIC TESTING AND ADVISE:
- FOUND: I inspected the vehicle and verified the client's concern that the check engine light is illuminated. I found there is an extended crank symptom present and a significant lack of power above 3,800 rpm. I retrieved diagnostic trouble code P0340 which indicates there is no signal present from the intake camshaft position sensor. I performed necessary diagnostic testing and found there is substantial damage to the powertrain wiring harness due to varmints. Recommend partially removing the wiring harness in order to facilitate repair, perform repairs, reinstall the vehicle harness, clear the codes and test drive to verify there are no additional faults.
- I inspected the door lock operation and verified the clients concern that the doors do not lock. I verified the fault is present during key fob use and power door lock button operation. I found there are no trouble codes stored in the body control module. During testing I found there is a door jar signal present at the body control module which is prohibiting the door locks from locking. I continued the inspection on the door lock system wiring and found there is damage to the body control module harness from varmints. Recommend partially removing the body control module harness, performing necessary repairs, reinstalling and reinitializing the power door lock system.
- DISASSEMBLE, REPAIR THE ELECTRICAL WIRING AS REQUIRED, REASSEMBLE, TEST FOR PROPER OPERATION.
- REPLACE THE FRONT AND REAR WINDSHIELD WIPER BLADES
- Rotate the tires and re-balance them. Enjoy a smoother ride while extending tire life!
- Inspect and make required adjustments to set "toe", "caster", and "camber" to factory specifications on the front and rear suspension (where applicable). Alignment warranty requires tire rotations and checking tire pressure in accordance with manufacturer's specifications.
- REPLACE THE CABIN AIR FILTER
- EXTRACT BROKEN BOLT FROM AIR FILTER HOUSING
PHILIPPE M. gave our service a 5 star review on 5/28/2024
