2016 Mazda CX-5
Mileage
107,962
Service Date
8/23/2023
Services Performed
- AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
- THE CHECK ENGINE LIGHT ILLUMINATED ON THE DASH WITH AN OBVIOUS MISFIRE CONDITION.
- FOUND: I inspected the vehicle and verified the client's concern that the check engine light is illuminated and there is a significant drivability issue present. I retrieved diagnostic trouble code P0303 which indicates there's a misfire concern on the number three cylinder. I performed necessary diagnostic testing and confirmed that the engine is misfiring on multiple cylinders. I inspected the secondary the ignition system and found the number one spark plug is fouled. I inspected the cylinder using a camera assembly and found the number one fuel injector is leaking fuel into the cylinder.
- SPARK PLUGS – Remove & Replace
- FUEL INJECTOR – Remove & Replace – All – [Includes: R&I Intake Manifold.]
- FOUND: WE FOUND THE REAR BRAKE LININGS IN NEED OF REPLACEMENT AT THIS TIME.
- Install premium grade brake pad set, clean and lubricate the caliper guides and hardware, inspect the hydraulic system reassemble and make adjustments as required. Remove brake rotors for resurfacing or replacement.
- Extract the existing brake fluid, replenish the system with fresh fluid, bleed the system of any air or preexisting brake fluid.
- STANDARD SYNTHETIC OIL CHANGE SERVICE: ____ SERVICE LIGHT RESET (This price applies to most cars, SUV's, trucks, and European cars cost extra) ____ LUBE STICKER Quote is for 5 quarts of Multi-grade synthetic motor oil per manufacturer specifications, additional quarts, grades, extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
- Environmental Waste Disposal Fee, EPA ID# CAL000295851
- California Recycling Fee
- Inspect and make required adjustments to set "toe", "caster", and "camber" to factory specifications on the front and rear suspension (where applicable). Alignment warranty requires tire rotations and checking tire pressure in accordance with manufacturer's specifications.
- Inspect the tire PSI and Inflate to Proper Specifications Front __34___PSI Rear__34___PSI
ADAM D. gave our service a 5 star review on 8/23/2023
