2014 Honda CR-V
Mileage
120,191
Service Date
5/24/2024
Services Performed
- AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
- ******************************************************************************************
- STANDARD SYNTHETIC OIL CHANGE SERVICE: ____ SERVICE LIGHT RESET (This price applies to most cars, SUV's, trucks, and European cars cost extra) ____ LUBE STICKER Quote is for 5 quarts of Multi-grade synthetic motor oil per manufacturer specifications, additional quarts, grades, extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
- California Recycling Fee
- Environmental Waste Disposal Fee, EPA ID# CAL000295851
- Inspect the tire PSI and Inflate to Proper Specifications Front __33___PSI Rear__33___PSI
- DISASSEMBLE, REPLACE THE ENGINE OIL PAN GASKET, REASSEMBLE, CLEAN AS BEST POSSIBLE.
- Rotate the tires front to rear to extend tire life.
- FOUND:
- REPLACE THE ENGINE AIR FILTER
- INSPECT AND ADVISE: I inspected the vehicle and verified the client's concern that there is a rattle noise present upon cold startup. I isolated the noise to the timing chain components. I suspect the intake variable valve timing phaser has failed and no longer locks in the retarded position for engine startup. Recommend removing the valve cover, confirming the phaser has failed, performing necessary repairs and verifying there are no additional faults.
- * UPON DISASSEMBLY, WE FOUND THAT THE TIMING CHAIN IS STRETCHED TO THE MAXIMUM LIMIT AND WILL REQUIRE REPLACEMENT.
- Inspect and make required adjustments to set "toe", "caster", and "camber" to factory specifications on the front and rear suspension (where applicable). Alignment warranty requires tire rotations and checking tire pressure in accordance with manufacturer's specifications.
- Clean the throttle body and butterfly valve, clean the mass air flow sensor, induce a cleaner to service the intake valves, intake plenum, combustion chamber, piston tops, + add a concentrated cleaner to the fuel tank. Take advantage of these cleaning chemicals by filling your fuel tank right away!
DEBORAH B. gave our service a 5 star review on 5/24/2024
