2016 Subaru Forester
Mileage
69,519
Service Date
5/31/2024
Services Performed
- There is a humming sound coming from the wheels, perhaps it's the bearings?
- Roadtest, inspect the integrity of the steering and suspension components, inspect the front and rear tires, inspect for excessive "play" in the wheel bearings and other related components, and advise: I performed a test drive and confirmed the customers concerned. That there is excessive noise from one of the wheel bearings. Further inspections found at the right rear wheel bearing is worn out and will need to be replaced. Recommend replace right rear wheel bearing. Recheck and verify for proper operation.
- STANDARD SYNTHETIC OIL CHANGE SERVICE: ____ SERVICE LIGHT RESET (This price applies to most cars, SUV's, trucks, and European cars cost extra) ____ LUBE STICKER Quote is for 5 quarts of Multi-grade synthetic motor oil per manufacturer specifications, additional quarts, grades, extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
- Environmental Waste Disposal Fee, EPA ID# CAL000295851
- California Recycling Fee
- STABILIZER BAR CONTROL LINK – Remove & Replace – Both
- This air duct cleaning service has been formulated to kill mold, mildew, fungi, and other mold producing organisms that grow in the air ducts. Induce the anti bacteria deodorizing cleaners on medium heat and allow it to circulate for 10-15 minutes.
- Clean the throttle body and butterfly valve, clean the mass air flow sensor, induce a cleaner to service the intake valves, intake plenum, combustion chamber, piston tops, + add a concentrated cleaner to the fuel tank. Take advantage of these cleaning chemicals by filling your fuel tank right away!
- Clean the battery terminals and cables and connections, reassemble, apply electrical coating if applicable.
- WHEEL HUB – Remove & Replace – Rear,One Side
- FOUND: WE FOUND THE FRONT & REAR BRAKE LININGS IN SPECIFICATION AT THIS TIME.
- Inspect the tire PSI and Inflate to Proper Specifications Front ____35_PSI Rear_35____PSI
TRISTAN & KAITLIN S. gave our service a 5 star review on 6/3/2024
