2018 BMW 530i
Mileage
44,960
Service Date
8/23/2024
Services Performed
- PERFORM NECESSARY DIAGNOSTIC TESTING AND ADVISE:
- Check and Advise I inspected the vehicle and confirmed the customers concerned check engine light is illuminated. Using a scanner, I was able to retrieve a stored diagnostic trouble code. P0456 evaporative control system fault very small leak detected. I had to remove the right rear wheel and the splash shield for the right rear wheel in order to gain access to the leak detection pump for a detailed inspection of the Evaporative System. Using specialized equipment including the use of a pressurized smoke machine I performed the necessary diagnostic testing and found the system to be sealed. At this time I suspect an intermittently leaking natural vacuum leak detection module. Recommend replace natural vacuum leak detection module. Suggests replace gas cap. Recommend monitor the condition.
- STANDARD EUROPEAN CAR SYNTHETIC OIL CHANGE SERVICE: ____ SERVICE LIGHT RESET (This price applies to most European cars) Quote is for 5 quarts of Multi-grade synthetic long life motor oil per manufacturer specifications, additional quarts, grades, extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
- Environmental Waste Disposal Fee, EPA ID# CAL000295851
- California Recycling Fee
- WE FOUND THE FRONT & REAR BRAKE LININGS IN SPECIFICATIONS AT THIS TIME.
- LEAK DETECTION CONTROL MODULE – Remove & Replace
- REMOVE & REPLACE- AIR FILTER
- REMOVE & REPLACE- CABIN FILTER
- Extract the existing brake fluid, replenish the system with fresh fluid, bleed the system of any air or preexisting brake fluid.
- Inspect the tire PSI and Inflate to Proper Specifications Front __35___PSI Rear__35___PSI
- Vacuum and clean the carpets, seats, trunk and door panels, clean windows, and apply dressing to the vinyl, and plastic.
GRAHAM C. gave our service a 5 star review on 8/23/2024
