Honda Archives

2007 Honda Accord
Mileage
183,079
Service Date
4/1/2022
Services Performed
AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
STANDARD SYNTHETIC BLEND OIL CHANGE SERVICE: ____ SERVICE LIGHT RESET (This price applies to most cars, SUV's, trucks, and European cars cost extra) ____ LUBE STICKER Quote is for 5 quarts of Multi-grade synthetic blend motor oil per manufacturer specifications, additional quarts, grades, or full synthetic oils extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
California Recycling Fee
Environmental Waste Disposal Fee, EPA ID# CAL000295851
FOUND:
Inspect the tire PSI and Inflate to Proper Specifications Front _35___PSI Rear__35___PSI
USE THE FACTORY RECOMMENDED OIL TYPE AND QUANTITY.
INSPECT FOR ENGINE OIL LEAKS AND ADVISE:
FOUND: FRONT VALVE COVER GASKET LEAKING OIL.
DISASSEMBLE, REPLACE THE FRONT VALVE COVER GASKET, REASSEMBLE, CLEAN AS BEST POSSIBLE.
JOANNE W. gave our service a 5 star review on 4/11/2022
2010 Honda Civic
Mileage
158,394
Service Date
4/4/2022
Services Performed
STANDARD SYNTHETIC OIL CHANGE SERVICE: ____ SERVICE LIGHT RESET (This price applies to most cars, SUV's, trucks, and European cars cost extra) ____ LUBE STICKER Quote is for 5 quarts of Multi-grade synthetic motor oil per manufacturer specifications, additional quarts, grades, extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
California Recycling Fee
Environmental Waste Disposal Fee, EPA ID# CAL000295851
FOUND:
Inspect the tire PSI and Inflate to Proper Specifications Front __32___PSI Rear___32__PSI
INSPECT AND ADVISE: I confirmed the customer's concern, that there is a clunking type noise when going over bumps.
Roadtest, inspect the integrity of the steering and suspension components, inspect the front and rear tires, inspect for excessive "play" in the wheel bearings and other related components, and advise: WE DUPLICATED THE DESCRIBED NOISE. WE RETORQUED THE REAR SUSPENSION MOUNTING BOLTS AS REQUIRED.
TEST THE HEADLIGHTS (LOW AND HIGH BEAMS), TAIL AND BRAKE LIGHTS, TURN SIGNALS, PARKING LIGHTS, SIDE MARKERS AND ADVISE:
Clean the throttle body and butterfly valve, clean the mass air flow sensor, induce a cleaner to service the intake valves, intake plenum, combustion chamber, piston tops, + add a concentrated cleaner to the fuel tank. Take advantage of these cleaning chemicals by filling your fuel tank right away!
REPLACE THE ENGINE AND CABIN AIR FILTERS
NANCY & DARRELL G. gave our service a 5 star review on 4/10/2022
2005 Honda Civic
Mileage
187,545
Service Date
4/8/2022
Services Performed
AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
STANDARD SYNTHETIC BLEND OIL CHANGE SERVICE: ____ SERVICE LIGHT RESET (This price applies to most cars, SUV's, trucks, and European cars cost extra) ____ LUBE STICKER Quote is for 5 quarts of Multi-grade synthetic blend motor oil per manufacturer specifications, additional quarts, grades, or full synthetic oils extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
California Recycling Fee
Environmental Waste Disposal Fee, EPA ID# CAL000295851
FOUND: WE FOUND THE FRONT BRAKE ROTORS WARPED CAUSING A PULSATION WHEN APPLIED. THE FRONT PADS AND ROTORS NEED TO BE REPLACED FOR REPAIR AS WITH THE REAR DRUMS AND SHOES IN THE REAR
Install premium grade brake pad set, clean and lubricate the caliper guides and hardware, inspect the hydraulic system reassemble and make adjustments as required. Remove brake rotors for resurfacing or replacement.
Replace brake shoes, clean and lubricate backing plate, clean and inspect hardware, reassemble and make adjustments as required.
Extract the existing brake fluid, replenish the system with fresh fluid, bleed the system of any air or preexisting brake fluid.
REMOVE & REPLACE- INSTALL NEW WIPER BLADES
TIMING BELT- WATER PUMP- TENSIONER AND SEALS – Remove & Replace – 1.7L Eng – [Includes: Adjust Valves.]
Flush the entire power steering fluid system using a chemical solvent to suspend debris and dissolve varnish, refill and bleed the system using modern flushing equipment, add a system conditioner to extend the hydraulic components life and promote smooth operations.
SPARK PLUGS – Remove & Replace
Clean the throttle body and butterfly valve, clean the mass air flow sensor, induce a cleaner to service the intake valves, intake plenum, combustion chamber, piston tops, + add a concentrated cleaner to the fuel tank. Take advantage of these cleaning chemicals by filling your fuel tank right away!
BALL JOINT – Remove & Replace – Lower,Both – [Serviced in Steering Knuckle Assembly.] – [DOES NOT include alignment.]
STABILIZER BAR CONTROL LINK FRONT – Remove & Replace – Both
STABILIZER LINK REAR – Remove & Replace – BOTH
Rotate the tires and re-balance them. Enjoy a smoother ride while extending tire life!
Inspect and make required adjustments to set "toe", "caster", and "camber" to factory specifications on the front and rear suspension (where applicable). Alignment warranty requires tire rotations and checking tire pressure in accordance with manufacturer's specifications.
Inspect the tire PSI and Inflate to Proper Specifications Front _30____PSI Rear__30___PSI
AIMEE B. gave our service a 5 star review on 4/9/2022
2006 Honda CR-V
Mileage
153,876
Service Date
4/8/2022
Services Performed
AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
STANDARD SYNTHETIC BLEND OIL CHANGE SERVICE: ____ SERVICE LIGHT RESET (This price applies to most cars, SUV's, trucks, and European cars cost extra) ____ LUBE STICKER Quote is for 5 quarts of Multi-grade synthetic blend motor oil per manufacturer specifications, additional quarts, grades, or full synthetic oils extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
California Recycling Fee
Environmental Waste Disposal Fee, EPA ID# CAL000295851
FOUND: THE FRONT BRAKE ROTORS HAVE EXCESSIVE LATERAL RUN-OUT.
DISASSEMBLE, REMOVE THE FRONT BRAKE ROTORS FOR REPLACEMENT, REASSEMBLE.
Inspect the tire PSI and Inflate to Proper Specifications Front __29___PSI Rear__29___PSI
DISASSEMBLE, REPLACE THE SPARK PLUGS, REASSEMBLE.
Induce a cleaner to service the intake valves, intake plenum, combustion chamber, piston tops, + add a concentrated cleaner to the fuel tank. Take advantage of these cleaning chemicals by filling your fuel tank right away!
INSTALL THE CUSTOMER SUPPLIED WIPER BLADES (IN REAR HATCH AREA).
DISASSEMBLE, REPLACE THE RADIATOR HOSES, REASSEMBLE, REPLENISH COOLANT, BLEED THE SYSTEM.
DISASSEMBLE, REPLACE THE REAR STRUT/COIL SPRING ASSEMBLIES, REASSEMBLE.
Inspect and make required adjustments to set "toe", "caster", and "camber" to factory specifications on the front and rear suspension (where applicable). Alignment warranty requires tire rotations and checking tire pressure in accordance with manufacturer's specifications.
ANN & LAUREN M. gave our service a 5 star review on 4/8/2022
2010 Honda Fit
Mileage
104,340
Service Date
3/17/2022
Services Performed
AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
PERFORM NECESSARY DIAGNOSTIC TESTING AND ADVISE:
THE CUSTOMER STATES THE TRANSMISSION "D" LIGHT IS FLASHING. INSPECT AND ADVISE ON NEEDED REPAIR.
FOUND: I inspected the vehicle and confirmed the client's concern that the check engine light is illuminated and the drive light is flashing. Code P0847 is stored in the transmission control module for a circuit fault with the third gear clutch pressure switch. I performed the necessary diagnostic testing and found the 3rd gear pressure switch has failed.
AT PRESSURE SWITCH – Remove & Replace – Front
STANDARD SYNTHETIC BLEND OIL CHANGE SERVICE: ____ SERVICE LIGHT RESET (This price applies to most cars, SUV's, trucks, and European cars cost extra) ____ LUBE STICKER Quote is for 5 quarts of Multi-grade synthetic blend motor oil per manufacturer specifications, additional quarts, grades, or full synthetic oils extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
California Recycling Fee
Environmental Waste Disposal Fee, EPA ID# CAL000295851
FOUND: WE FOUND THE FRONT & REAR BRAKE LININGS IN SPECIFICATIONS AT THIS TIME.
Clean the battery terminals and cables and connections, reassemble, apply electrical coating, inspect and refill battery water.
Inspect the tire PSI and Inflate to Proper Specifications Front _33____PSI Rear__33___PSI
PHILLIPA & IAN M. gave our service a 5 star review on 3/17/2022
2012 Honda Pilot
Mileage
143,017
Service Date
12/8/2021
Services Performed
AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
THE PASSENGER SIDE HEADLIGHT IS FULL OF MOISTURE. AT THIS TIME WE ARE GOING TO REPLACE THE HEADLIGHT UNDER WARRANTY.
CANDACE & DAVE B. gave our service a 5 star review on 12/8/2021
2020 Honda CR-V
Mileage
5,543
Service Date
11/24/2021
Services Performed
AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
STANDARD SYNTHETIC OIL CHANGE SERVICE: (This price applies to most cars, however, SUV's, trucks, and some European cars cost extra) Quote is for 5 quarts of Multi-grade synthetic motor oil per manufacturer specifications, additional quarts, grades, extra –OIL AND FILTER CHANGE – Replace the oil drain plug sealing washer where applicable –FULL DIGITAL VEHICLE INSPECTION W/PICTURES –CHECK AND TOP OFF ALL FLUIDS –VISUAL BRAKE INSPECTION FRONT AND REAR –VISUAL CHECK FOR POSSIBLE OIL LEAKS –INSPECT DRIVE BELTS AND HOSES –INSPECT FRONT/REAR WIPER BLADES –INSPECT THE TIRES AND SET TO PROPER PSI ** –INSPECT THE ENGINE AIR FILTER AND CABIN AIR FILTER –INSPECT FRONT AND REAR SUSPENSION –INSPECT FRONT/REAR STRUTS/SHOCKS –PERFORM EXTERIOR VEHICLE LIGHT INSPECTION –INSPECT CV AXLES/BOOTS/DRIVESHAFT(S) –INSPECT STEERING LINKAGE –RESET SERVICE LIGHT –ROAD TEST VEHICLE –CLEAN WINDSHIELD *** ** TIRE ROTATION ADDITIONAL FEE *** WASH VEHICLE WHEN TIME PERMITS
Environmental Waste Disposal Fee, EPA ID# CAL000295851
California Recycling Fee
Rotate the tires front to rear to extend tire life.
FOUND: WE FOUND THE BRAKE LINING IN SPECIFICATIONS AT THIS TIME.
Inspect the tire PSI and Inflate to Proper Specifications Front ____33_PSI Rear___33__PSI
MICHELE W. gave our service a 5 star review on 11/28/2021
2008 Honda CR-V
Mileage
64,563
Service Date
11/16/2021
Services Performed
Quote is for 5 quarts of Multi-grade non-synthetic motor oil per manufacturer specifications, additional quarts, grades, or synthetic oils extra — Drain and refill motor oil — Replace oil filter — Replace oil drain plug sealing washer if applicable — Quick visual inspect of belts and hoses — Check/Top off underhood fluids if serviceable
California Recycling Fee
Environmental Waste Disposal Fee, EPA ID# CAL000295851
BRAKE INSPECTION: Road test vehicle, visually Inspect the front and rear brake linings, brake hoses, and hydraulic components and advise: RF MM, LF MM RR MM LR MM
USE THE FACTORY RECOMMENDED OIL TYPE AND QUANTITY.
STRUT ASSEMBLY – Removal & Installation – Both – [DOES NOT include disassemble or alignment.]
TIE ROD &/OR END – Remove & Replace – Outer,Both – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some models. If
Inspect and make required adjustments to set "toe", "caster", and "camber" to factory specifications on the front and rear suspension (where applicable). Alignment warranty requires tire rotations and checking tire pressure in accordance with manufacturer's specifications.
Install premium grade brake pad set, clean and lubricate the caliper guides and hardware, inspect the hydraulic system reassemble and make adjustments as required. Remove brake rotors for resurfacing or replacement.
Extract the existing brake fluid, replenish the system with fresh fluid, bleed the system of any air or preexisting brake fluid.
Inspect the tire PSI and Inflate to Proper Specifications Front _____PSI Rear_____PSI
BILL & JAN N. gave our service a 5 star review on 11/17/2021
2013 Honda Pilot
Mileage
83,025
Service Date
11/10/2021
Services Performed
AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
REMOVE & REPLACE AS REQUIRED FOR REPAIR, INSTALL A NEW PASSENGER SIDE HEADLIGHT BULB AND RECHECK THE SYSTEM OPERATION.
THE CUSTOMER STATES THE "CHECK ENGINE" LIGHT IS ON WITH THE STABILITY CONTROL LIGHT. THEY HAVE BOTH GONE ON AND OFF A COUPLE TIMES OVER THE LAST FEW WEEK WITH NO OBVIOUS SYMPTOMS. INSPECT AND ADVISE ON NEEDED REPAIR.
FOUND: I inspected the vehicle and confirmed the check engine light is illuminated and there is a misfire concern present. I retrieved diagnostic trouble code p0303 which indicates there is a misfire concern on the number 3 cylinder. I performed the necessary diagnostic testing and found the number 3 spark plug is fouled.
SPARK PLUGS – Remove & Replace
Quote is for 5 quarts of Multi-grade full-synthetic motor oil per manufacturer specifications, additional quarts, grades extra — Drain and refill motor oil — Replace oil filter — Replace oil drain plug sealing washer if applicable — Quick visual inspect of belts and hoses — Check/Top off underhood fluids if serviceable
Environmental Waste Disposal Fee, EPA ID# CAL000295851
California Recycling Fee
WE FOUND THE FRONT & REAR BRAKES IN SPECIFICATIONS AT THIS TIME.
Extract the existing brake fluid, replenish the system with fresh fluid, bleed the system of any air or preexisting brake fluid.
Flush the entire power steering fluid system using a chemical solvent to suspend debris and dissolve varnish, refill and bleed the system using modern flushing equipment, add a system conditioner to extend the hydraulic components life and promote smooth operations.
Inspect the tire PSI and Inflate to Proper Specifications Front _35____PSI Rear__35___PSI
PATRICIA W. gave our service a 5 star review on 11/10/2021
2004 Honda CR-V
Mileage
197,741
Service Date
11/9/2021
Services Performed
AAA DISCOUNT REWARDS MEMBER CARD # ……………………………
REPLACE THE LOWER CONTROL ARM ASSEMBLIES AND ENGINE/TRANSAXLE MOUNTS AS PREVIOUSLY RECOMMENDED.
DISASSEMBLE, REPLACE THE LOWER CONTROL ARM ASSEMBLIES, REASSEMBLE.
Inspect and make required adjustments to set "toe", "caster", and "camber" to factory specifications on the front and rear suspension (where applicable). Alignment warranty requires tire rotations and checking tire pressure in accordance with manufacturer's specifications.
DISASSEMBLE, REPLACE THE ENGINE AND TRANSAXLE MOUNTS, REASSEMBLE.
Inspect the tire PSI and Inflate to Proper Specifications Front _26____PSI Rear__26___PSI
BRIAN & SUE P. gave our service a 5 star review on 11/9/2021